Previous issues

  • HOME
  • BROWSE ARTICLES
  • Previous issue
Volume 13(2); Jun 1995
Evaluation of Material Degradation and Life Prediction for High Temperature Structures
정세희
J Weld Join. 1995;13(2):1-11.   Published online June 26, 1995
PDFPDF    
Remaining Life Assessment of High Temperature Steam Piping
윤기봉
J Weld Join. 1995;13(2):12-24.   Published online June 26, 1995
PDFPDF    
Assessment on the Crack Growth of High Temperature Header at Boiler
김건영, 송기욱
J Weld Join. 1995;13(2):25-31.   Published online June 26, 1995
PDFPDF    
A Counterplan and Life Prediction of Degradaded Structures
권재도, 진영준
J Weld Join. 1995;13(2):32-41.   Published online June 26, 1995
PDFPDF    
Non-corrosive Flux Brazing of Aluminum - Brazing Technology and Trend in Japan ( 3 )
정재필, 죽본정, 강춘식
J Weld Join. 1995;13(2):53-59.   Published online June 26, 1995
PDFPDF    
The Influence of Initial Overloads on the Fatigue Life of Spot-welded Tensile-shear Specimens
강성수, 정원욱
J Weld Join. 1995;13(2):60-67.   Published online June 26, 1995
PDFPDF    
Analytical Solution for Transient Temperature Distribution in Fillet Arc Welding
정선국, 조형석
J Weld Join. 1995;13(2):68-81.   Published online June 26, 1995
PDFPDF    
Quality Improvement on Joints of Electronic Materials and Its Reliabilty by Fe-Ni Alloy Clad Lead Frame.
신영의, 최인수, 안승호
J Weld Join. 1995;13(2):82-88.   Published online June 26, 1995
PDFPDF    
Study on Wear and Corrosion Resistance of Porosity Controlled Thermal Sprayed WC Coatings
박정식, 양병모, 이재관, 김종철, 박경채
J Weld Join. 1995;13(2):89-95.   Published online June 26, 1995
PDFPDF    
A Modification in the Analysis of the Growth Rate of Short Fatigue Cracks in S45C Carbon Steel under Reversed Loading
A.J. McEvily, 신용승
J Weld Join. 1995;13(2):96-105.   Published online June 26, 1995
PDFPDF    
Characteristics of Adhesive Bonded Joints of Steels for Automobile ( I )
윤병현, 권영각
J Weld Join. 1995;13(2):106-114.   Published online June 26, 1995
PDFPDF    
Modeling of Metal Transfer in GMA Welding Process
이강희, 최상균, 유중돈
J Weld Join. 1995;13(2):115-121.   Published online June 26, 1995
PDFPDF    
Effect of cooling rate on the microstructure and impact toughness of Cu-bearing HSLA steels
박태원, 심인옥, 김영우, 강정윤, 박화순
J Weld Join. 1995;13(2):122-131.   Published online June 26, 1995
PDFPDF    
Liquid Phase Diffusion Bonding Procedure of Rene80 / B / Rene80 System - Liquid Phase Diffusion Bonding Using B Powder Coating Method
정재필, 강춘식
J Weld Join. 1995;13(2):132-138.   Published online June 26, 1995
PDFPDF    
Evaluation of Underclad Crack Susceptibility of the SA508 Class 3 Steel for Pressure Vessels - Optimization of Heat Input -
김석원, 양성호, 김준구, 이영호
J Weld Join. 1995;13(2):139-149.   Published online June 26, 1995
PDFPDF    

Journal of
Welding and
Joining

Print ISSN: 2466-2232
Online ISSN: 2466-2100

Register for e-submission  Register for e-submission
Register here to access the e-submission system of Journal of Welding and Joining for authors and reviewers.
Register for e-submission  Manuscript Submission
To submit a manuscript, please visit the Journal of Welding and Joining e-submission management system at https://submit.e-jwj.org, read the Instructions for Authors, and log into the Journal of Welding and Joining e-submission system.
For assistance with manuscript submission, please contact: koweld@kwjs.or.kr.
Register for e-submission  Free archive
Anyone may access any past or current articles without logging in.


ABOUT
BROWSE ARTICLES
ARTICLE CATEGORY 
FOR CONTRIBUTORS
Editorial Office
#304, San-Jeong Building, 23, Gukhoe-daero 66-gil, Yeongdeungpo-gu, Seoul 07237, Korea
Tel: +82-2-538-6511    Fax: +82-2-538-6510    E-mail: koweld@kwjs.or.kr                

Copyright © 2024 by The Korean Welding and Joining Society.

Developed in M2PI