Microstructure and Hardness of Surface Melting Hardened Zone of Mold Steel, SM45C using Yb:YAG Disk Laser
Kwang-Hyeon Lee, Seong-Won Choi, Tae-Jin Yoon, Chung-Yun Kang
J Weld Join. 2016;34(1):75-81. Published online 2016 Feb 29 DOI: https://doi.org/10.5781/JWJ.2016.34.1.75
|
Citations to this article as recorded by
Layered hardening and grain structure refinement of low-alloyed tool steel applying two-stage surface morphology modification by laser phase transformation and ultrasonic peening
D. A. Lesyk, S. Martinez, B. N. Mordyuk, V. V. Dzhemelinskyi, A. Lamikiz, D. Grzesiak, A. V. Kotko, W. Alnusirat
MRS Advances.2023; 8(17): 988. CrossRef Microstructural characterizations and wear and corrosion behaviors of laser-nitrided NAK80 mold steel
Won-Sang Shin, Ahjin Sim, Seungwoo Baek, Soo Jin Choi, Heeshin Kang, Yoon-Jun Kim, Changkyoo Park
Surface and Coatings Technology.2021; 410: 126956. CrossRef Experimental Investigation of Al-CuMgMn Alloy Developed by Laser Beam Surface Modification for Wear Resistance
Mesay Alemu Tolcha, Moera Gutu Jiru, Hirpa Gelgele Lemu
Metals.2021; 11(5): 712. CrossRef Interface Microstructure Characteristics of Friction-Welded Joint of Titanium to Stainless Steel with Interlayer
Muralimohan Cheepu, P. Susila
Transactions of the Indian Institute of Metals.2020; 73(6): 1497. CrossRef Characterization of Interfacial Microstructure in Friction Welds Between Inconel 718 and SM45C Steel
Muralimohan Cheepu, Woo Seong Che
Transactions of the Indian Institute of Metals.2020; 73(6): 1567. CrossRef Effect of Laser Heat-Treatment and Laser Nitriding on the Microstructural Evolutions and Wear Behaviors of AISI P21 Mold Steel
Won-Sang Shin, Hyun Jong Yoo, Jeoung Han Kim, Jiyeon Choi, Eun-Joon Chun, Changkyoo Park, Yoon-Jun Kim
Metals.2020; 10(11): 1487. CrossRef Influence of diode laser heat treatment and wear conditions on the fretting wear behavior of a mold steel
Changkyoo Park, Jinwoo Kim, Ahjin Sim, Hyonkee Sohn, Ho Jang, Eun-Joon Chun
Wear.2019; 434-435: 202961. CrossRef Influence of laser surface engineering of AISI P20-improved mold steel on wear and corrosion behaviors
Changkyoo Park, Ahjin Sim, Sanghoon Ahn, Heeshin Kang, Eun-Joon Chun
Surface and Coatings Technology.2019; 377: 124852. CrossRef Microstructural characterization of Ni-based self-fluxing alloy after selective surface-engineering using diode laser
Eun-Joon Chun, Changkyoo Park, Hiroshi Nishikawa, Min-Su Kim
Applied Surface Science.2018; 442: 726. CrossRef Microstructural Characterization of Surface Softening Behavior for Cu-Bearing Martensitic Steels after Laser Surface Heat Treatment
Eun-Joon Chun, Ahjin Sim, Min-Su Kim, Namhyun Kang
Metals.2018; 8(6): 470. CrossRef
|