 |
|
Optimization of Direct Energy Deposition of 304L Stainless Steel through Laser Process Parameters
SeongSeon Shin, Sung-Min Kwon, ChiYen Kim, JongHoon Lee, JunHo Hwang, HyunDeok KIm
J Weld Join. 2021;39(2):182-188. Published online 2021 Apr 7 DOI: https://doi.org/10.5781/JWJ.2021.39.2.7
|
|
Citations to this article as recorded by
 Characterization of Microstructural Anisotropy in 17–4 PH Stainless Steel Fabricated by DMLS Additive Manufacturing and Laser Shot Peening
Venu Kumar Sarila, Syed Quadir Moinuddin, Muralimohan Cheepu, Hamshini Rajendran, Venkata Charan Kantumuchu
Transactions of the Indian Institute of Metals.2023; 76(2): 403. CrossRef Numerical Simulations of the Effect of Heat Input on Microstructural Growth for MIG-Based Wire Arc Additive Manufacturing of Inconel 718
Muralimohan Cheepu, Venkata Charan Kantumuchu
Transactions of the Indian Institute of Metals.2023; 76(2): 473. CrossRef Direct Energy Depositions of a 17-4 PH Stainless Steel: Geometrical and Microstructural Characterizations
Cindy Morales, Mattia Merlin, Annalisa Fortini, Alessandro Fortunato
Coatings.2023; 13(3): 636. CrossRef Effect of residual stress and phase constituents on corrosion-cavitation erosion behavior of 304 stainless steel by iso-material manufacturing of laser surface melting
B.S. Cao, C.L. Wu, L. Wang, S. Zhang, C.H. Zhang, X.Y. Sun
Journal of Materials Research and Technology.2023; 26: 6532. CrossRef Effect of filler materials on dissimilar TIG welding of Inconel 718 to high strength steel
Anuradha M., Chittaranjan Das Vemulapalli, Muralimohan Cheepu
Materials Today: Proceedings.2022; 52: 1314. CrossRef Superior tensile and fatigue properties of Incoloy 901 repair welds produced by direct energy deposition
Jongkee Ahn, Chiwon Kim, Dongyeop Lee, Bohee Kim, Hyun-Uk Hong, Je-Hyun Lee
Journal of Materials Research and Technology.2022; 19: 3554. CrossRef
|