Warning: fopen(/home/virtual/kwjs/journal/upload/ip_log/ip_log_2024-03.txt): failed to open stream: Permission denied in /home/virtual/lib/view_data.php on line 88 Warning: fwrite() expects parameter 1 to be resource, boolean given in /home/virtual/lib/view_data.php on line 89 Fatigue Crack Propagation Life Assessment of T-joint Fillet Weldment Considering Residual Stress under Random Loading

Journal of KWJS 2011;29(2):46-55.
Published online May 7, 2011.
변동하중하의 잔류응력을 고려한 십자형 용접부의 잔존 수명 예측에 관한 연구
, , , , ,
 
Fatigue Crack Propagation Life Assessment of T-joint Fillet Weldment Considering Residual Stress under Random Loading
Sung-Hoon Kim, Kyung-Su Kim, Jang-Hyun Lee, Chang-Hyuk Yoo, Won-Hyo You, Mi-Ji Yoo
Abstract
  This paper deals with the crack propagation life assessment of T-joint welded structure where typical fatigue cracks have been frequently initiated when the marine vessels experience the storm load. Welding residual stresses are calculated to investigate its effects on the fatigue life. Thereafter the residual stress distribution was applied to the AFGROW life prediction program, which incorporated the loading, the welding residual stress, and the geometric shape of the structure. The fatigue tests of the T-joint welded specimen under storm loading show the beach mark clearly generated on the fractured section of the weldment. The crack propagation life estimated based on the beach mark is compared with that of AFGROW to validate the life prediction. Based on the results, the evaluation method of the remaining fatigue life for T-joint fillet weldment of marine vessel’s cargo hold with random load or storm load was established.
Key Words: Fatigue crack propagation, Random loading, Storm loading, AFGROW, Residual stress


ABOUT
BROWSE ARTICLES
ARTICLE CATEGORY 
FOR CONTRIBUTORS
Editorial Office
#304, San-Jeong Building, 23, Gukhoe-daero 66-gil, Yeongdeungpo-gu, Seoul 07237, Korea
Tel: +82-2-538-6511    Fax: +82-2-538-6510    E-mail: koweld@kwjs.or.kr                

Copyright © 2024 by The Korean Welding and Joining Society.

Developed in M2PI