Previous issues

  • HOME
  • BROWSE ARTICLES
  • Previous issue
Volume 12(4); Dec 1994
Introduction to Nondestructive Testing
정용무
J Weld Join. 1994;12(4):1-10.   Published online December 26, 1994
PDFPDF    
Defect Evaluation of Steel Welds by ultrasonic Testing
이의종
J Weld Join. 1994;12(4):11-20.   Published online December 26, 1994
PDFPDF    
Update Application of Ultrasonic Flaw Detector
조정상
J Weld Join. 1994;12(4):21-34.   Published online December 26, 1994
PDFPDF    
Method of Radiographic Testing and Industrial Application
이용
J Weld Join. 1994;12(4):35-40.   Published online December 26, 1994
PDFPDF    
A Study on the Welding Process of High Strength Steel Pipe in GTAW-SMAW and SAW
이철구, 조선근
J Weld Join. 1994;12(4):41-49.   Published online December 26, 1994
PDFPDF    
Brazing Technology and Trend in Japan ( 1 ) - Aluminum Brazing -
정재필, 강춘식, 박영조, 황선효
J Weld Join. 1994;12(4):50-62.   Published online December 26, 1994
PDFPDF    
A Study on the Stress Corrosion Cracking Evaluation for Weld Joint of Steel by Using Miniaturized Small Specimen
유효선, 임재규, 정세희
J Weld Join. 1994;12(4):63-75.   Published online December 26, 1994
PDFPDF    
Effect of Ca on Droplet Transfer Phenomena in GMA Welding
안영호, 방국수, 이종봉, 장래웅
J Weld Join. 1994;12(4):76-84.   Published online December 26, 1994
PDFPDF    
Hardening Characteristics of Aluminum Alloy Surface by PTA Overlaying with Metal Powders ( I ) - Optimum condition for formation and microstructure of thicker surface alloyed layer -
이규천, 中田一博, 강원석, 이영호, 松田福久
J Weld Join. 1994;12(4):85-101.   Published online December 26, 1994
PDFPDF    
Hardening Characteristics of Aluminum Alloy Surface by PTA Overlaying with Metal Powders ( II ) - Hardening characteristics and wear resistance of thicker surface alloyed layer -
이규천, 中田一博, 강원석, 이영호, 松田福久
J Weld Join. 1994;12(4):102-109.   Published online December 26, 1994
PDFPDF    
A Study on Bondability of Electronic Materials by Different Heat Sources
신영의, 양협, 김경섭
J Weld Join. 1994;12(4):110-116.   Published online December 26, 1994
PDFPDF    
A Study of Resistance of Fatigue Crack in Aluminum Alloy Plate Bonded with FRP
윤한기, 오세욱, 박원조, 허정원
J Weld Join. 1994;12(4):117-126.   Published online December 26, 1994
PDFPDF    
A Study on the Resistance Spot Welding of Aluminum Alloy ( I )
김상필, 홍태민, 장희석
J Weld Join. 1994;12(4):127-140.   Published online December 26, 1994
PDFPDF    
The X-Ray Study on Macrostress and Microstress for Two-Phase Stainless Steel
오세욱, 김득진, 廣瀨幸雄
J Weld Join. 1994;12(4):141-150.   Published online December 26, 1994
PDFPDF    
A Study on Fatigue Strength Characteristics of Weld Joint using Metal Type Flux Cored Wire
강성원, 신동진, 김환식
J Weld Join. 1994;12(4):151-161.   Published online December 26, 1994
PDFPDF    

Journal of
Welding and
Joining

Print ISSN: 2466-2232
Online ISSN: 2466-2100

Register for e-submission  Register for e-submission
Register here to access the e-submission system of Journal of Welding and Joining for authors and reviewers.
Register for e-submission  Manuscript Submission
To submit a manuscript, please visit the Journal of Welding and Joining e-submission management system at https://submit.e-jwj.org, read the Instructions for Authors, and log into the Journal of Welding and Joining e-submission system.
For assistance with manuscript submission, please contact: koweld@kwjs.or.kr.
Register for e-submission  Free archive
Anyone may access any past or current articles without logging in.


ABOUT
BROWSE ARTICLES
ARTICLE CATEGORY 
FOR CONTRIBUTORS
Editorial Office
#304, San-Jeong Building, 23, Gukhoe-daero 66-gil, Yeongdeungpo-gu, Seoul 07237, Korea
Tel: +82-2-538-6511    Fax: +82-2-538-6510    E-mail: koweld@kwjs.or.kr                

Copyright © 2024 by The Korean Welding and Joining Society.

Developed in M2PI