Previous issues

  • HOME
  • BROWSE ARTICLES
  • Previous issue
Volume 18(3); Jun 2000
Design of Brazing Joints(Ⅱ) - Design of Joint Clearance -
강정윤
J Weld Join. 2000;18(3):1-4.   Published online June 26, 2000
PDFPDF    
Current Status of Tailored Blank Technology
이종봉, 박희동
J Weld Join. 2000;18(3):5-11.   Published online June 26, 2000
PDFPDF    
Welding Technology for Tailored Blank Manufacturing
김기철, 김재웅
J Weld Join. 2000;18(3):12-19.   Published online June 26, 2000
PDFPDF    
Welding Systems for Tailored Blank Manufacturing
최이천, 오영근
J Weld Join. 2000;18(3):20-24.   Published online June 26, 2000
PDFPDF    
Comparison of Characteristics of Mash Seam Welding and Laser Welding Tailored Blank
최정영, 이창희
J Weld Join. 2000;18(3):25-31.   Published online June 26, 2000
PDFPDF    
Quality Monitoring System for Tailored Blank Welding
이경돈
J Weld Join. 2000;18(3):32-40.   Published online June 26, 2000
PDFPDF    
Forming Technology of Tailroad Blanks
박기철
J Weld Join. 2000;18(3):41-50.   Published online June 26, 2000
PDFPDF    
A study on the Erosion Behavior of the Ceramic Sprayed Coating Layer in the Molton 55% Al-Zn
강태영, 임병문, 최장현, 김영식
J Weld Join. 2000;18(3):51-59.   Published online June 26, 2000
PDFPDF    
A Study on the Image Processing of Visual Sensor for Weld Seam Tracking in GMA Welding
정규철, 김재웅
J Weld Join. 2000;18(3):60-67.   Published online June 26, 2000
PDFPDF    
An Experimental Study on Allowable Size of Incomplete Penetration in Butt Joint Bridge Weld Considering Fatigue Strength
백영남, 장영권
J Weld Join. 2000;18(3):68-75.   Published online June 26, 2000
PDFPDF    
A Study on the Three-Deimensional Heat Flow Analysis in the Laser Welding for Deep Penetration
이규태, 김재웅
J Weld Join. 2000;18(3):76-82.   Published online June 26, 2000
PDFPDF    
Nd:YAG Laser Cladding of Inconel with Wire Feeding
김재도, 배민종, 팽윤
J Weld Join. 2000;18(3):83-88.   Published online June 26, 2000
PDFPDF    
Reliability of Fine Pitch Solder Joint with Sn-3.5wt%Ag Lead-Free Solder
하범용, 이준환, 신영의, 정재필, 한현주
J Weld Join. 2000;18(3):89-96.   Published online June 26, 2000
PDFPDF    
A Study on Corrosion Failure of a Weathering Steel Weldment with Various Applied Potentials in Acid-chloride Solution
최윤석, 김정구, 김종집, 이병훈
J Weld Join. 2000;18(3):97-105.   Published online June 26, 2000
PDFPDF    
High Temperature Tensile Property of Transient Liquid Phase Bonded Joints of Ni-base Single Crystal Superalloy
김대업, 강정윤
J Weld Join. 2000;18(3):106-113.   Published online June 26, 2000
PDFPDF    
Real Time Quality Assurance with a Pattern Recognition Algorithm during Resistance Spot Welding
조용준, 이세헌
J Weld Join. 2000;18(3):114-121.   Published online June 26, 2000
PDFPDF    
Design of Plasma Cutting Torch by Tolerance Propagation Analysis
방용우, 최덕준, 장희석, 양진승
J Weld Join. 2000;18(3):122-130.   Published online June 26, 2000
PDFPDF    

Journal of
Welding and
Joining

Print ISSN: 2466-2232
Online ISSN: 2466-2100

Register for e-submission  Register for e-submission
Register here to access the e-submission system of Journal of Welding and Joining for authors and reviewers.
Register for e-submission  Manuscript Submission
To submit a manuscript, please visit the Journal of Welding and Joining e-submission management system at https://submit.e-jwj.org, read the Instructions for Authors, and log into the Journal of Welding and Joining e-submission system.
For assistance with manuscript submission, please contact: koweld@kwjs.or.kr.
Register for e-submission  Free archive
Anyone may access any past or current articles without logging in.


ABOUT
BROWSE ARTICLES
ARTICLE CATEGORY 
FOR CONTRIBUTORS
Editorial Office
#304, San-Jeong Building, 23, Gukhoe-daero 66-gil, Yeongdeungpo-gu, Seoul 07237, Korea
Tel: +82-2-538-6511    Fax: +82-2-538-6510    E-mail: koweld@kwjs.or.kr                

Copyright © 2024 by The Korean Welding and Joining Society.

Developed in M2PI