 |
|
Investigation of Single Pass Welding of Thick AH36 Steel Plates in a Square Groove Butt Joint Configuration During AC-GMAW
Adeel Ikram, Ahmad Raza, Hyun Chung
J Weld Join. 2020;38(3):254-262. Published online 2020 Jun 26 DOI: https://doi.org/10.5781/JWJ.2020.38.3.4
|
|
Citations to this article as recorded by
 Welded steel in marine environment – Experimental and numerical study of mechanical properties degradation
Darko Pastorcic, Goran Vukelic, Spiro Ivosevic
Materials Today Communications.2023; 34: 105280. CrossRef Research on the sidewall penetration mechanisms of cable-type welding wire narrow gap GMAW process
Zhidong Yang, Yuntao Chen, Zewei Zhang, Chenfu Fang, Kai Xu, Peng He, Zhengdong Zhang
The International Journal of Advanced Manufacturin.2022; 120(3-4): 2443. CrossRef Computational analysis of metal transfer mode, dynamics, and heat transfer under different pulsating frequencies in pulsed wire-arc additive manufacturing
Adeel Ikram, Hyun Chung
Journal of Computational Design and Engineering.2022; 9(3): 1045. CrossRef Characterization of the effects of high-intensity negative current pulses on metal transfer and melting rate in the AC-GMAW process
Álisson Fernandes Rosa, Luciano Machado Cirino, Claudio Marques Schaeffer, Mateus Barancelli Schwedersky, Régis Henrique Gonçalves e Silva
The International Journal of Advanced Manufacturin.2022; 122(3-4): 1737. CrossRef Low-Energy Pulsed-Laser Welding as a Root Pass in a GMAW Joint: An Investigation on the Microstructure and Mechanical Properties
Mariane Chludzinski, Rafael Eugenio dos Santos, Marta Ortega-Iguña, Cristina Churiaque, Manuel Porrúa-Lara, José María Sánchez-Amaya
Materials.2022; 15(21): 7741. CrossRef Numerical model of corrosion influence on mechanical behavior of steel AH36
Darko Pastorcic, Goran Vukelic, Zeljko Bozic
Procedia Structural Integrity.2022; 42: 374. CrossRef Microstructural aspects of hydrogen stress cracking in seawater for low carbon steel welds produced by flux-cored arc welding
Hanji Park, Cheolho Park, Junghoon Lee, Hyunbin Nam, Byungrok Moon, Younghoon Moon, Namhyun Kang
Materials Science and Engineering: A.2021; 820: 141568. CrossRef Numerical simulation of arc, metal transfer and its impingement on weld pool in variable polarity gas metal arc welding
Adeel Ikram, Hyun Chung
Journal of Manufacturing Processes.2021; 64: 1529. CrossRef Fatigue Analysis of the Effects of Incomplete Penetration Defects on Fatigue Crack Initiation Points in Butt-Welded Members
Zhen-Ming Wang, Kyong-Ho Chang, Shazia Muzaffer
Journal of Welding and Joining.2020; 38(6): 543. CrossRef
|