| Friction Stir Welding of 900MPa Grade TWIP Steel |
| Kwang-Jin Lee*, Sang-Hyuk Kim**, Eui-Pyo Kwon*, Kyu-Song Son** |
*Korea Institute of Industrial Technology, Jeonju 561-202, Korea
**School of Materials Science of Engineering, Chon-buk National University, Jeonju 561-756, Korea |
Correspondence:
Kwang-Jin Lee Email: kjlee@kitech.re.kr
Published online May 14, 2014
|
|
|
|
|
Friction stir welding (FSW) was successfully performed about 900MPa grade Twinning Induced Plastisity (TWIP) steel. A PCBN tool with convex-type shoulder was applied. Optimal process conditions were deduced. Microstructure and mechanical properties such as hardness, tensile strength and impact absorbed energy were observed and evaluated, respectively. An optical microscope (OM) and a field emission scanning electron microscope (FE-SEM) was selected for observing the grain structure. |
| Keywords:
TWIP steel | FSW | Tensile strength | Hardness | Impact
|
|
|
|
|
|
|
 |
 |
 |
 |
 |
 Register for e-submission |
|
Register here to access the e-submission system of Journal of Welding and Joining for authors and reviewers.
|
| Manuscript Submission |
|
To submit a manuscript, please visit the Journal of Welding and Joining e-submission management system at https://submit.e-jwj.org, read the Instructions for Authors, and log into the Journal of Welding and Joining e-submission system. For assistance with manuscript submission, please contact: koweld@kwjs.or.kr.
|
| Free archive |
|
Anyone may access any past or current articles without logging in.
|
|
|
PDF Links
Full text via DOI
Download Citation 
CrossRef TDM
E-Mail
