Warning: fopen(/home/virtual/kwjs/journal/upload/ip_log/ip_log_2024-07.txt): failed to open stream: Permission denied in /home/virtual/lib/view_data.php on line 100 Warning: fwrite() expects parameter 1 to be resource, boolean given in /home/virtual/lib/view_data.php on line 101 Brazing Filler Metal and Process for Stainless Steel

J Weld Join > Volume 30(6); 2012 > Article
Journal of KWJS 2012;30(6):15-20.
DOI: https://doi.org/10.5781/KWJS.2012.30.6.15    Published online December 23, 2012.
Brazing Filler Metal and Process for Stainless Steel
Sung Chul Hong*, Sang Yoon Park*, Do Hyun Jung*, Joo Hee Oh**, Jae Hoon Lee***, Wonjoong Kim*, Jae Pil Jung*
Correspondence:  Jae Pil Jung,
Email: jpjung@uos.ac.kr
Abstract
Brazing technology has been widely used among bonding technologies because it enables to bond various metals, even ceramics, dissimilar metals, and give higher bonding strength, cost down, automation, etc. However, there are many parameters to achieve optimal brazing joint such as brazing alloys, brazing atmospheres, designs and brazing methods, etc. The brazing parameters affect seriously on the characteristic of final brazing products. Stainless steel is broadly used in high temperature applications, chemical industry, heat exchangers, muffler of vehicles, and so on. Accordingly, in this article, brazing alloys, forms of brazing alloys, brazing methods and atmospheres for stainless steel were described.
Key Words: Stainless steel, Brazing, Nickel brazing, Furnace brazing, Brazing alloy


ABOUT
BROWSE ARTICLES
ARTICLE CATEGORY 
FOR CONTRIBUTORS
Editorial Office
#304, San-Jeong Building, 23, Gukhoe-daero 66-gil, Yeongdeungpo-gu, Seoul 07237, Korea
Tel: +82-2-538-6511    Fax: +82-2-538-6510    E-mail: koweld@kwjs.or.kr                

Copyright © 2024 by The Korean Welding and Joining Society.

Developed in M2PI