Warning: fopen(/home/virtual/kwjs/journal/upload/ip_log/ip_log_2024-12.txt): failed to open stream: Permission denied in /home/virtual/lib/view_data.php on line 100 Warning: fwrite() expects parameter 1 to be resource, boolean given in /home/virtual/lib/view_data.php on line 101 Effects of C on the Strength and Toughness of FCAW Weld Metal of YS 460 MPa Steels for Ship and Offshore Structures
  • Search
  • Advanced Search
J Weld Join > Volume 32(6); 2014 > Article
Research Paper
Journal of Welding and Joining 2014;32(6):565-570.
DOI: https://doi.org/10.5781/JWJ.2014.32.6.29    Published online December 31, 2014.
Effects of C on the Strength and Toughness of FCAW Weld Metal of YS 460 MPa Steels for Ship and Offshore Structures
Sang-Hoon Jeong*, Jeong-Ho Eom*, Han-Geul Choi*, Byung-Ho Jeong**, Sung-Hwa Hur**, Chang-Yong Kang**
Correspondence:  Chang-Yong Kang,
Email: metkcy@pknu.ac.kr
Abstract
This paper has an purpose to study the effect of C on the toughness of YS 460 MPa FCAW weld metal. These effects were evaluated by charpy impact and CTOD test about 4 FCAW weld metal containing various C and Si content in relation to microstructure. Increase of C content was helpful to increase AF volume fraction and reduce PF(G) and FS volume fraction by increasing super cooling rate for ferrite transformation. Also, Increase of C content up to 0.045wt% made the strength and impact toughness higher by increasing AF volume fraction. The weld metal containing higher C content indicated higher CTOD value. It is because the volume fraction of PF(G) and FS, can play a role as crack initiation site, was reduced. Effect of C on the strength and elongation of weld metal was higher with an increase of Si contents.
Key Words: FCAW weld metal, C, Impact toughness, CTOD, Tensile properties
TOOLS
METRICS Graph View
  • 1 Crossref
  •    
  • 2,278 View
  • 37 Download
Related articles

Fracture Toughness Estimate of H-Section Steel for Offshore Structure2024 October;42(5)

Study on the Fracture Toughness of FCA Weldment with the Yield Strength 420MPa Grade High Strength Steels for Offshore Structures Depending on the Welding Position2018 April;36(2)

Effects of Heat Inputs on the Mechanical Properties of FCA Weldment of YP 690MPa Grade Steels2016 December;34(6)

Effects of PWHT on Weld Metal Properties of YS 460 MPa Steels for Ship and Offshore Structures2014 August;32(4)

Effects of PWHT on Tensile Properties and Impact Toughness of FCAW Weld Metal of FH Steels for Cargo Tank in LPG Carrier2014 August;32(4)

ABOUT
BROWSE ARTICLES
ARTICLE CATEGORY 
FOR CONTRIBUTORS
Editorial Office
#304, San-Jeong Building, 23, Gukhoe-daero 66-gil, Yeongdeungpo-gu, Seoul 07237, Korea
Tel: +82-2-538-6511    Fax: +82-2-538-6510    E-mail: koweld@kwjs.or.kr                

Copyright © 2024 by The Korean Welding and Joining Society.

Developed in M2PI