Warning: fopen(/home/virtual/kwjs/journal/upload/ip_log/ip_log_2024-06.txt): failed to open stream: Permission denied in /home/virtual/lib/view_data.php on line 100 Warning: fwrite() expects parameter 1 to be resource, boolean given in /home/virtual/lib/view_data.php on line 101 A Study on Welding Process Algorithm through Real-time Current Waveform Analysis

J Weld Join > Volume 33(4); 2015 > Article
Journal of Welding and Joining 2015;33(4):24-29.
DOI: https://doi.org/10.5781/JWJ.2015.33.4.24    Published online August 31, 2015.
A Study on Welding Process Algorithm through Real-time Current Waveform Analysis
Jin Young Yoon*, Young Min Lee**, Soon Cheol Shin***, Hae Woon Choi****
Correspondence:  Hae Woon Choi,
Email: hwchoi@kmu.ac.kr
The current waveform was analysed to monitor the weld quality in real time process. The acquired current waveform was discretely analysed for the top and bottom limits of peaks as well as the pulse frequency measurement. Fast Fourier Transform was implemented in the program to monitor the pulse frequency in real time. The developed algorithm or program was tested for the validation purpose. The cross-section of weld profile was compared to the current waveform profile to correlate the monitored signal and the actual parts. Pulse frequency was also used as auxiliary tool for the quality monitoring. Based on the results, it was possible to evaluate the quality of welding by measure the current waveform profile and frequency measurement.
Key Words: MAG welding, Real time, Current, Voltage, Weld monitoring

Editorial Office
#304, San-Jeong Building, 23, Gukhoe-daero 66-gil, Yeongdeungpo-gu, Seoul 07237, Korea
Tel: +82-2-538-6511    Fax: +82-2-538-6510    E-mail: koweld@kwjs.or.kr                

Copyright © 2024 by The Korean Welding and Joining Society.

Developed in M2PI