1. N. Biunno, A root cause failure mechanism for solder joint integrity of electroless nickel/immersion gold surface finishes, Proc. IPC Printed Circuits Expo1999, Paper. (1999)
2. M. Amagai, Y. Toyoda, T. Ohnishi, and S. Akita, High drop test reliability, lead-free solders,
Proceedings of 54th Electronic Components and Technology Conference. 2 (2004) 1304–1309. Vol.1302
[CROSSREF]
3. H. Kim, M. Zhang, M C. Kumar, D. Suh, P. Liu, D. Kim, M. Xie, and Z. Wang, Improved DropReliability Performance with Lead Free Solders of Low Ag Content and Their Failure Modes,
Proceedings 57th Electronic Components and Technology Conference. (2007) 962–967.
[CROSSREF]
4. W. Seo, K.-H. Kim, J.-H. Bang, M.-S. Kim, and S. Yoo, Effect ofBath Life of Ni (P) on the Brittle-Fracture Behavior of Sn-3.0 Ag-0.5 Cu/ENIG,
J. Electron. Mater. 43 (2014) 4457–4463.
[CROSSREF] [PDF]
5. B.-S. Lee, Y.-H. Ko, J.-H. Bang, C.-W. Lee, S. Yoo, J.-K. Kim, and J.-W. Yoon, Interfacial reactions and mechanical strength of Sn-3.0 Ag-0.5 Cu/Ni/Cu and Au- 20Sn/Ni/Cu solder joints for power electronics applications,
Microelectron, Reliab. 71 (2017) 119–125.
[CROSSREF]
6. Y.-C. Sohn and J. Yu, Correlation betweenchemical reaction and brittle fracture found in electroless Ni (P)/ immersion gold-solder interconnection,
J. Mater. Res. 20 (2005) 1931–1934.
[CROSSREF]
7. M. Ratzker, A. Pearl, M. Osterman, M. Pecht, and G. Milad, Review ofCapabilities of the ENEPIG Surface Finish,
J. Electron. Mater. 43 (2014) 3885–3897.
[CROSSREF] [PDF]
8. J. Y. Kim, J. Yu, and S. H. Kim, Effects ofsulfide-forming element additions on the Kirkendall void formation and drop impact reliability of Cu/Sn-3.5 Ag solder joints,
Acta Mater. 57 (2009) 5001–5012.
[CROSSREF]
9. L. Yin, F. Wafula, N. Dimitrov, and P. Borgesen, Toward abetter understanding of the effect of Cu electroplating process parameters on Cu3Sn voiding,
J. Electron. Mater. 41 (2012) 302–312.
[CROSSREF] [PDF]
10. C. Yu, Y. Yang, K. Wang, J. Xu, J. Chen, and H. Lu, Relation betweenKirkendall voids and intermetallic compound layers in the SnAg/Cu solder joints,
J. Mater. Sci. Mater. Electron. 23 (2012) 124–129.
[CROSSREF] [PDF]
11. J. Yu and J. Kim, Effects ofresidual S on Kirkendall void formation at Cu/Sn-3.5 Ag solder joints,
Acta Mater. 56 (2008) 5514–5523.
[CROSSREF]
12. J. Standard, S. S. T. Association. Solder BallShear, JESD22-B117A, Oct. (2006)
13. D. Goyal, T. Lane, P. Kinzie, C. Panichas, K. M. Chong, and O. Villalobos, Failure mechanismof brittle solder joint fracture in the presence of electroless nickel immersion gold (ENIG) interface,
Electronic Components and Technology Conference 2002. Proceedings. 52nd. (2002) 732–739.
[CROSSREF]
14. K. Harada, S. Baba, Q. Wu, H. Matsushima, T. Matsunaga, Y. Ucgai, and M. Kimura, Analysis ofsolder joint fracture under mechanical bending test,
Electronic Components and Technology Conference 2003. Proceedings. 53rd. (2003) 1731–1737.
[CROSSREF]
15. F. Song, S. R. Lee, K. Newman, B. Sykes, and S. Clark, High-speed solder ball shear and pull tests vs. board level mechanical drop tests, correlation of failure mode and loading speed,
Electronic Components and Technology Conference 2007. ECTC’07. Proceedings. 57th. (2007) 1504–1513.
[CROSSREF]
16. C. E. Ho, R. Y. Tsai, Y. L. Lin, and C. R. Kao, Effect ofCu concentration on the reactions between Sn-Ag-Cu solders and Ni,
J. Electron. Mater. 31 (2002) 584–590.
[CROSSREF] [PDF]
17. C.-F. Tseng, T.-K. Lee, G. Ramakrishna, K.-C. Liu, and J.-G. Duh, Suppressing Ni3Sn4 formation in the Sn-Ag-Cu solder joints with Ni-P/Pd/Au surface finish,
Mater. Lett. 65 (2011) 3216–3218.
[CROSSREF]
18. K. Newman, BGA brittle fracture-alternative solder joint integrity test methods,
Electronic Components and Technology Conference 2005. Proceedings. 55th. (2005) 1194–1201.
[CROSSREF]