1. J. I. Jang, J. B. Ju, B. W. Lee, D. Kwon, and W. S. Kim, Effects of microstructural change on fracture characteristics in coarse-grained heat-affected zones of QLT- processed 9% Ni steel,
Mater. Sci. Eng. A. 340 (2003) 68–79.
https://doi.org/10.1016/S0921-5093(02)00190-9
[CROSSREF]
4. S. Y. Park, Y J. Kang, D J. Oh, S. W. Song, and H. U. Hong, Solidification cracking susceptibility of the weld metal of additively manufactured 316L stainless steel,
J. Weld. Join. 39(1) (2021) 45–50.
https://doi.org/10.5781/JWJ.2021.39.1.5
[CROSSREF]
5. R. Rajasekaran, A. K. Lakshminarayanan, M. Vasudevan, and P. Vasantha Raja, Stress corrosion cracking susceptibility of 316LN grade stainless steel weld joint in boiling magnesium chloride hexahydrate environment,
Met. Mater. Int. 28 (2022) 2778–2797.
https://doi.org/10.1007/s12540-021-01162-9
[CROSSREF]
7. D. J. Lee, J. C. Byun, J. H. Sung, and H. W. Lee, The dependence of crack properties on the Cr/Ni equivalent ratio in AISI 304L austenitic stainless steel weld metals,
Mater. Sci. Eng. A. 513-514 (2009) 154–159.
https://doi.org/10.1016/j.msea.2009.01.049
[CROSSREF]
8. T. U. Park, D. H. Jung, J. H. Park, J. H. Kim, and I. W. Han, Changes in the mechanical properties and microstructure of high manganese steel by high heat input welding and general welding processes,
J. Weld. Join. 40(1) (2022) 33–39.
https://doi.org/10.5781/JWJ.2022.40.1.4
[CROSSREF]
13. S. H. Jeong, G. T. Park, B. Y. Kim, J. O. Moon, S. J. Park, and C. H. Lee, Heat-Affected Zone Characteristics with Post-Weld Heat Treatments in Austenitic Fe-Mn-Al-C Lightweight Steels,
Met. Mater. Int. 8 (2022) 2371–2380.
https://doi.org/10.1007/s12540-021-01133-0
[CROSSREF]
17. X. Cao, W. Wallace, J. P. Immarigeon, and C. Poon, Research and progress in laser welding of wrought aluminum alloys. II. Metallurgical microstructures, defects, and mechanical properties,
Mater. Manuf. Process. 18(1) (2003) 23–49.
[CROSSREF]
19. W. Xijing, S. Katayama, and A. Matsunawa, Character of melting and evaporation in laser beam welding of two aluminum alloys, Weld. J. 76(2) (1997)
21. M. H. Choi, J. H. Lee, H. B. Nam, N. H. Kang, M. H. Kim, and D. W. Cho, Tensile and Microstructural Characteristics of Fe-24Mn Steel Welds for Cryogenic Applications,
Met. Mater. Int. 26 (2020) 240–247.
https://doi.org/10.1007/s12540-019-00320-4
[CROSSREF]
22. T. Liu, L. J. Yang, H. L. Wei, W. C. Qiu, and T. Debroy, Composition change of stainless steels during keyhole mode laser welding, Weld. J. 96 (2017) 258–270.