Warning: fopen(/home/virtual/kwjs/journal/upload/ip_log/ip_log_2024-03.txt): failed to open stream: Permission denied in /home/virtual/lib/view_data.php on line 88 Warning: fwrite() expects parameter 1 to be resource, boolean given in /home/virtual/lib/view_data.php on line 89 Thermal Fatigue Characteristics of μBGA Solder Joints with Underfill

Journal of KWJS 2003;21(4):25-30.
Published online August 25, 2003.
[연구논문]언더필이 적용된 μBGA 솔더 접합부의 열피로특성
, , ,
 
Thermal Fatigue Characteristics of μBGA Solder Joints with Underfill
Young-Wook Koh, Jong-Min Kim, Jun-Hwan Lee, Young-Eui Shin
Abstract
There have been many researches for small scale packages such as CSP, BGA, and Flipchip. Underfill encapsulant technology is one of the latest assembly technologies. The underfill encapsulant could enhance the reliability of the packages by flowing into the gap between die and substrate. In this paper, the effects of underfill packages by both aspects of thermal and mechanical reliabilities are studied. Especially, it is focused to value board-level reliability whether by the underfill is applied or not. First of all, The predicted thermal fatigue lifes of underfilled and no underfilled μBGA solder joints are performed by Coffin-Manson's equation and FEA program, ANSYS(version 5.62). Also, the thermal fatigue lifes of μBGA solder joints are experimented by thermal cycle test during the temperature, 218K to 423K. Consequently, both experimental and numerical study show that μBGA with underfill has over ten times better fatigue life than μBGA without underfill.


ABOUT
BROWSE ARTICLES
ARTICLE CATEGORY 
FOR CONTRIBUTORS
Editorial Office
#304, San-Jeong Building, 23, Gukhoe-daero 66-gil, Yeongdeungpo-gu, Seoul 07237, Korea
Tel: +82-2-538-6511    Fax: +82-2-538-6510    E-mail: koweld@kwjs.or.kr                

Copyright © 2024 by The Korean Welding and Joining Society.

Developed in M2PI