Warning: fopen(/home/virtual/kwjs/journal/upload/ip_log/ip_log_2024-04.txt): failed to open stream: Permission denied in /home/virtual/lib/view_data.php on line 88 Warning: fwrite() expects parameter 1 to be resource, boolean given in /home/virtual/lib/view_data.php on line 89 A Study of Dynamic Characteristic for Resistance Spot Welding Process Using Servo-gun System
  • Search
  • Advanced Search
Journal of KWJS 2005;23(3):40-46.
Published online July 15, 2005.
[연구논문]서보건 이용 시 저항 점 용접의 동특성 분석에 관한 연구
, ,
 
A Study of Dynamic Characteristic for Resistance Spot Welding Process Using Servo-gun System
Jung-Yeub Baek, Jong-Gu Lee, Se-Hun Rhee
Abstract
Air gun has been one of the good tools to press two sheet metals. However, it is not easy to control the acting force precisely. A Servo-gun is a good tool to control the acting force on the workpiece comparing with the air gun. Servo-gun has a higher tensile shear strength and lower indentation depth as well as smaller spatter. Dynamic resistance was obtained according to the acting force and welding current. As the acting force was changed during welding, the welding quality was increased.
TOOLS
METRICS Graph View
  • 1,730 View
  • 0 Download
Related articles

A Study on the Efficiency Evaluation for the Motion Parameters of the Manual Welding Process Using Data Envelopment Analysis2023 April;41(2)

Study on Nugget Diameter Prediction of Resistance Spot Welding Using an Artificial Neural Network2021 December;39(6)

Prediction of Indentation Depth of Resistance Spot Welding Using Electrode Displacement Signal2021 June;39(3)

A Study on Cladding Characteristics Using the Laser-Arc Hybrid Welding Process2019 August;37(4)

A Study on Spatter Tracking Algorithm for a Vertical GMA Welding Process2019 August;37(4)

ABOUT
BROWSE ARTICLES
ARTICLE CATEGORY 
FOR CONTRIBUTORS
Editorial Office
#304, San-Jeong Building, 23, Gukhoe-daero 66-gil, Yeongdeungpo-gu, Seoul 07237, Korea
Tel: +82-2-538-6511    Fax: +82-2-538-6510    E-mail: koweld@kwjs.or.kr                

Copyright © 2024 by The Korean Welding and Joining Society.

Developed in M2PI