Volume 15 Issue 1

Analysis of Restraint Stress Acting on the Weldment

신상범, 윤중근

Journal of KWJS. 1997;15(1):9-14.

Residual Stress , Distortion , and Fracture Analysis of Welded Structures using Finite Element Method

심용래

Journal of KWJS. 1997;15(1):15-25.

Numerical Analysis of Weldment by Considering the Convection of Welding Arc and Weld Pool

김원훈, 나석주

Journal of KWJS. 1997;15(1):26-35.

Welding Technology for the Process Optimization by the Computer Code SYSWELD

이재경, 이기훈

Journal of KWJS. 1997;15(1):36-45.

A Study on the Stress Corrosion Cracking Evaluation for Weld Joint of TMCP Steel by SP-SSRT Method

유효선, 정희돈, 유대영, 정세희

Journal of KWJS. 1997;15(1):46-54.

Stress Intensity Factor for the Cracked Sheet Subjected to Normal Stress and Reinforced with a Plate by Spot Welding

이강용, 김옥환

Journal of KWJS. 1997;15(1):55-65.

Development of an Effective Arc Sensing Algorithm for Seam-Tracking in Flux-Cored Arc Welding Process for Horizontal Fillet Joints .

권순창, 최재성, 장낙영

Journal of KWJS. 1997;15(1):66-80.

A Study on Automatic Seam Tracking System Using Electro-magnetic Sensor for Sheet Metal Arc Welding of Butt Joints

유병희, 김재웅

Journal of KWJS. 1997;15(1):81-91.

Effect of HAZ Softening Zone on Creep Rupture Propertes of 1.0Cr-1.0Mo-0.25V Turbine Rotor Steels - Part I : Creep Rupture Life -

오영근, J.E. Indacochea

Journal of KWJS. 1997;15(1):92-100.

Effect of HAZ Softening Zone on Creep Rupture Propertes of 1.0Cr-1.0Mo-0.25V Turbine Rotor Steels - Part II : Carbide Morphology -

오영근, J.E. Indacochea

Journal of KWJS. 1997;15(1):101-108.

Effect of Shielding gas Composition on Arc Stability and Transfer mode of High deposition GMA Welding

경규담, 천홍정, 이정헌, 강봉용, 김희진

Journal of KWJS. 1997;15(1):109-115.

Improvement of Powder Feeding Characteristics of Fine ( 5 μm ) Al2O3 Powder by Modification of the Powder Feeding Systems and Characterization of the Coating Layer depending on Plasma Spraying Conditions

설동욱, 김병희, 정민석, 임영우, 서동수

Journal of KWJS. 1997;15(1):116-124.

Optimization of HVOF Spray Parameters for Cr3C2-7wt%NiCr Coating Powder by Experimental Design Method

김병희, 서동수

Journal of KWJS. 1997;15(1):125-134.

A Study on the Surface Hardening of Aluminum Alloy - TIG Overlay Hardening of Al 503 -

이영호, 강원석, 이규천

Journal of KWJS. 1997;15(1):135-148.