Volume 20 Issue 2

Cracking in Welds and Its Prevention(Ⅱ)-Cracks in Welds and Hot Cracking(Ⅰ)-

박화순

Journal of KWJS. 2002;20(2):1-3.

A Study on Welding Education and Qualification System(Ⅰ)

황선효

Journal of KWJS. 2002;20(2):4-12.

A Study on Korean Welding Education and Qualification System(Ⅱ)

황선효

Journal of KWJS. 2002;20(2):13-20.

Prediction and Control of Welding Deformation for Panel Block Structure

김상일, 강중규, 한종만

Journal of KWJS. 2002;20(2):21-26.

Development of Numerical Method for Assessment of Crack initiation

이제명, 윤동렬

Journal of KWJS. 2002;20(2):27-31.

Improvements in Strength and Weldability of Cr-Mo Steel Plates for Pressure Vessels and Boiler

장웅성, 윤병현, 권영각, 이길제

Journal of KWJS. 2002;20(2):32-41.

Application of Continuous Indentation Testing Method for Evaluating the Strength Performances of Weldments

장재일, 손동일, 최열, 권동일, 박상기, 김우석

Journal of KWJS. 2002;20(2):42-49.

Residual Stress Measurement on Welded Specimen by Neutron Diffraction

박만진, 장동영, 최회동

Journal of KWJS. 2002;20(2):50-58.

Estimation of Fatigue Strength in Resistance Spot Weldment of the Vehicle Body

손광재, 양영수, 조성규, 장상균

Journal of KWJS. 2002;20(2):59-64.

A Study on the GMA Welding Characteristics of Al5083-O Aluminum Alloy According to the Shield Gas Mixing Ratio and Heat Input

정재강, 양훈승, 이동길

Journal of KWJS. 2002;20(2):65-70.

The Strain Measurement of Pure Aluminum Welded Zone by the Laser System

성백섭, 차용훈, 이연신

Journal of KWJS. 2002;20(2):71-76.

A Study on the Characteristics Sn-Ag-X Solder Joint

김문일, 문준권, 정재필

Journal of KWJS. 2002;20(2):77-81.

Hot Cracking Behavior in Inconel 690 Overlay Welds on Mn-Ni-Cr-Mo Steel for Pressure Vessels

양병일, 김정태, 박광식, 신용범, 안용식, 박화순

Journal of KWJS. 2002;20(2):82-89.

The Improvement of 2nd Level Solder Joint Reliability for Flip Chip Ball Grid Array

김경섭, 이석, 장의구

Journal of KWJS. 2002;20(2):90-94.

A Study on the Feasibility of Partial Penetration Laser Welding for the Lap Joint of 390MPa High Strength Steel Sheets

이경돈, 박기영, 김주관

Journal of KWJS. 2002;20(2):95-101.

Parameter Design and Analysis for Aluminum Resistance Spot Welding

YongJoon Cho, Wei Li, S.Jack Hu

Journal of KWJS. 2002;20(2):102-108.

Properties of Plasma Sprayed Al₂O₃/SS316 Graded Coatings

민재웅, 송병길, 김삼중, 노재승, 서동수

Journal of KWJS. 2002;20(2):109-115.

Fatigue Life Prediction for Resistance Spot Weldment of Aluminum Alloy Sheet

장건익, 안병국, 김동건

Journal of KWJS. 2002;20(2):116-124.