Journal of Welding and Joining

Search

Close

Previous issues

Volume 23 Issue 6

Standardization for Temperature Distribution Prediction of the Arc Weld using FEA
Journal of KWJS. 2005;23(6):1-7.
Review on the International Joint Researches for Evaluation of Welding Residual Stresses
Jong-Sung Kim, June-Soo Park, Tae-Eun Jin
Journal of KWJS. 2005;23(6):8-17.
General Guide for Hot Spot Stress Analysis
Journal of KWJS. 2005;23(6):18-28.
A Review on the International Effects for the Fatigue Strength Assessment of Welded Structures
Myung-Hyun Kim, Yoo-Il Kim
Journal of KWJS. 2005;23(6):29-36.
Characteristics of Fatigue Crack Propagations with Respect to Loading Directions in Butt-Welded Steel Plates with the Same Direction of Rolling and Welding Bead
Yong-Bok Lee, Sung-Yeup Kim, Byung-Duck Oh
Journal of KWJS. 2005;23(6):37-42.
Laser Welding of Seal Tube for Instrumented Irradiation Fuel Test
Soo-Sung Kim, Chul-Yong Lee, Woong-Ki Kim, Geun-Il Park, Jinh-Yun Koh, Jun-Seok Seo
Journal of KWJS. 2005;23(6):43-48.
A Study on the Resistance Welding of Metallic Sandwich Panel : Part 1 - Determination of Process Parameters
Sang-Min Lee, Jin-Beom Kim, Suck-Joo Na
Journal of KWJS. 2005;23(6):49-54.
A Study on the Resistance Welding of Metallic Sandwich Panel : Part 2 - Process Analysis
Sang-Min Lee, Jin-Beom Kim, Suck-Joo Na
Journal of KWJS. 2005;23(6):55-60.
Evaluation of Creep Crack Growth Failure Probability at Weld Interface Using Monte Carlo Simulation
Jin-Sang Lee, Kee-Bong Yoon
Journal of KWJS. 2005;23(6):61-66.
Effect of Spew Fillet on Failure Strength Properties of Natural Fiber Reinforced Composites Including Adhesive Bonded Joints
Ho-Chel Yoon, Jun-Yong Choi, Yon-Jig Kim, Jae-Kyoo Lim
Journal of KWJS. 2005;23(6):67-71.
The Evaluation of STS304 Coating Layer on S45C Substrate by Friction Surfacing Process
Joong-Suk Noh, Houn-Jin Cho, Heung-Ju Kim, Chang-Gun Chun, Woong-Seong Chang
Journal of KWJS. 2005;23(6):72-76.
Low Temperature Bonding Process of Silicon and Glass using Spin-on Glass
Jae-Hak Lee, Choong-Don Yoo
Journal of KWJS. 2005;23(6):77-86.
Evaluation of Notch Location Effect on Ductile Crack Initiation at Strength Mismatched Joints by Finite Element Method and Ultrasonic-Mechatronics System
Gyu-Baek An, Han-Sur Bang, Masao Toyoda
Journal of KWJS. 2005;23(6):87-92.
A Characteristics of Zn-Al-Cu System Pb-free Solder Alloys for Ultra High Temperature Applications
Seong-Jun Kim, Hye-Seong Na, Tae-Kyo Han, Bong-Keun Lee, Chung-Yun Kang
Journal of KWJS. 2005;23(6):93-98.
The Mixing Ratio Effect of Insert Metal Powder and Insert Brazing Powder on Microstructure of the Region Brazed on DS Ni Base Super Alloy
Chang-Ho Ye, Bong-Keun Lee, Woo-Young Song, In-Seok Oh, Chung-Yun Kang
Journal of KWJS. 2005;23(6):99-105.
대한용접학회지 제23권 총목차
편집부
Journal of KWJS. 2005;23(6):106-109.
대한용접학회지 집필규정 외
편집부
Journal of KWJS. 2005;23(6):110-117.
[학회소식]
편집부
Journal of KWJS. 2005;23(6):118-130.
[회원사동정]
편집부
Journal of KWJS. 2005;23(6):131-136.

Go to Top