Previous issues
Volume 24 Issue 4
-
Evaluation of Friction Spot Joining Weldability of Al Alloys for Automotive
- Hyeon-Jin Cho, Heung-Ju Kim, Chang-Keun Cheon, Woong-Seong Chang
- Journal of KWJS. 2006;24(4):1-5.
-
Microstructures and Mechanical Properties of the Friction Stir Welded Dissimilar Joint of AZ31B/A6061
- Heung-Ju Kim, Chang-Keun Cheon, Sook-Hwan Kim, Woong-Seong Chang
- Journal of KWJS. 2006;24(4):6-10.
-
Friction Stir Welding : Heat Input Calculation
- Rajesh S.R, Heung-Ju Kim, Han-Sur Bang, Woong-Seong Chang
- Journal of KWJS. 2006;24(4):11-14.
-
Effect of Laser Welding Variables on the Formability of Si Added Steel Welds
- Joon-Sik Park, In-Su Woo, Jong-Bong Lee
- Journal of KWJS. 2006;24(4):15-21.
-
A Study on CO2 Laser-TIG Hybrid Welding of Zinc-Coated Steel Sheet Part 1: Analysis of Welding Phenomena
- Cheol-Hee Kim, Woong-Yong Choi, Hyun-Byung Chae, Jeong-Han Kim, Se-Hun Rhee
- Journal of KWJS. 2006;24(4):22-26.
-
A Study on CO2 Laser-TIG Hybrid Welding of Zinc-Coated Steel Sheet Part 2: Relationship between Welding Parameters and Weldability
- Cheol-Hee Kim, Woong-Yong Choi, Hyun-Byung Chae, Jeong-Han Kim, Se-Hun Rhee
- Journal of KWJS. 2006;24(4):27-31.
-
Investigation of Cutting Characteristics in the Sharp Edge for the Case of Cutting of a Low Carbon Steel Sheet using High-power CW Nd:YAG Laser
- Dong-Gyu Ahn, Young-Tae Yoo
- Journal of KWJS. 2006;24(4):32-38.
-
Prediction Model for the Microstructure and Properties in Weld Heat Affected Zone: Ⅲ. Prediction Model for the Austenite Grain Growth Considering the Influence of Initial Austenite Grain Size in Weld HAZ of Precipitates Free Low Alloyed Steel
- Sang-Ho Uhm, Joon-Oh Moon, Hong-Chul Jeong, Jong-Bong Lee, Changhee Lee
- Journal of KWJS. 2006;24(4):39-49.
-
학회소식
- 편집부
- Journal of KWJS. 2006;24(4):50-58.
-
회원사동정 외
- 편집부
- Journal of KWJS. 2006;24(4):59-65.