Journal of Welding and Joining

Search

Close

Previous issues

Volume 33 Issue 4

Special Issues Laser Peening Process and Its Application Technique
Jong-Do Kim, Muneharu KUTSUNA, Yuji SANO
J Weld Join. 2015;33(4):1-6.
Special Issues Recent Trends of the Material Processing Technology with Laser - ICALEO 2014 Review -
Mokyoung Lee
J Weld Join. 2015;33(4):7-16.
Special Issues The Effect of Shielding Gas Composition on High Power Laser Welding Characteristics
Young-Nam Ahn, Cheolhee Kim
J Weld Join. 2015;33(4):17-23.
Special Issues A Study on Welding Process Algorithm through Real-time Current Waveform Analysis
Jin Young Yoon, Young Min Lee, Soon Cheol Shin, Hae Woon Choi
J Weld Join. 2015;33(4):24-29.
Research Papers Effect on the Stabilizing Heat Treatment to Weld Joint for the USC Coal Boiler Tubes(SA213 TP347H)
Jong-Seok Ahn, Jin-Keun Park, Gil-Jae Lee, Jae-Yeon Yoon
J Weld Join. 2015;33(4):30-36.
Research Papers A Study of Characteristics on the Dissimilar Metals (STS 316L - Carbon Steel: ASTM A516-70) Welds made with GTAW
Se Cheol Kim, Tae Woo Shin, In Joon Moon, Bok Su Jang, Jin Hyun Koh
J Weld Join. 2015;33(4):37-43.
Research Papers The Effect of Nano Functionalized Block Copolymer Addition on the Joint Strength of Structural Epoxy Adhesive for Car Body Assembly
Hye-rim Lee, So-jeong Lee, Chang-young Lim, Jong-dock Seo, Mok-soon Kim, Jun-ki Kim
J Weld Join. 2015;33(4):44-49.
Research Papers Development of Durability Enhancement Technology for Arc Weldings in Advanced High Strength Steel (AHSS) Chassis Parts
Kwang Bok Lee, Seung Taik Oh
J Weld Join. 2015;33(4):50-56.
Research Papers Development of New Low Frequency ECT Sensor to Detect Inner Defects(I) - Characteristic of Loss of Induced Electromotive Force -
Jeong-Ung Park, Mun-Seok Jang, Guk-Ju Gim, Beom-Ki Kim
J Weld Join. 2015;33(4):57-62.
Research Papers Development of New Low Frequency ECT Sensor to Detect Inner Defects(II) - Application to Welding Specimens Included Defects -
Jeong-Ung Park, Mun-Seok Jang, Guk-Ju Gim, Beom-Ki Kim
J Weld Join. 2015;33(4):63-67.

Go to Top