Most-cited are based on citations from 2022 ~ 2024.
-
Research Papers
Changes in the Mechanical Properties and Microstructure of High Manganese Steel by High Heat Input Welding and General Welding Processes
- Tae-Uk Park, Dong-Hee Jung, Ji-Hyun Park, Jong-Ho Kim, Il-Wook Han
- J Weld Join. 2022;40(1):33-39.
-
Research Papers
Comparison of Welding Deformation Characteristics by Circumferential Welding for Austenitic and Duplex Stainless Steel Pipe : Experimental Study
- Myung-Su Yi
- J Weld Join. 2022;40(2):141-148.
-
Review Paper
Review on Vacuum Laser Beam Welding
- Yongki Lee, Jason Cheon, Cheolhee Kim
- J Weld Join. 2022;40(1):74-83.
-
Research Papers
Development and Evaluation of Stainless Steel-Base Flux-Cored Wires for 9% Nickel Steel
- Tae-Uk Park, Young-Cheon Jeong, Hee-Dae Im, Chang-hyun Choi, Woong Kil
- J Weld Join. 2022;40(5):367-376.
-
Research Papers
Joining Technologies and Solutions for Aluminum-based Battery Case Manufacturing
- Yong Kim, Yeong-Do Park
- J Weld Join. 2022;40(1):54-73.
-
Research Papers
A Study on Welding-induced Temperature Distribution and Deformation of IMO Type C LNG Fuel Tank Support Structures
- Dong-Hee Park, Myung-Su Yi, Jae-Myung Lee
- J Weld Join. 2022;40(2):118-132.
-
Research Papers
Fundamental Experiments of Pulsed GMA Additive Manufacturing
- Hojin Yoo, Jongho Jeon, Hansol Kim, Geonho Lee, Seungcheol Shin, Jungho Cho, In Hwan Lee, Geon Hwee Kim, Myun Joong Hwang
- J Weld Join. 2022;40(1):84-89.
-
Research Papers
Crack Propagation Characterization Applying High Manganese Austenitic Steel to Independent Type B Tank
- Sung-Ku Kang
- J Weld Join. 2022;40(1):9-15.
-
Research Papers
Optimization of FC-CSP and MLCC Soldering Process Using Type 7 Solder Paste
- Hye-Min Lee, Mi-Song Kim, Myeongin Kim, Won Sik Hong
- J Weld Join. 2022;40(2):165-174.
-
Research Papers
Residual Stress and Deformation Characteristics by FSW and SAW of Wear Resistant Steel
- Jeongung Park, Gyubaek An, Dusan Kim
- J Weld Join. 2022;40(2):133-140.
-
Research Papers
Study on Effect of Process Variable on Fastening Quality Using Process Monitoring Data of Flow Drill Screwed 590DP Steel/AA5052 combination
- Tae-Young Kang, Han-ju Lee, Karim Md Abdul, Dae-Geun Nam, Byeong-ryong Lee, Jung-Muk Choi, Yeong-Do Park
- J Weld Join. 2022;40(3):256-264.
-
Research Papers
Characterization of High-Temperature Tensile Properties and Thermal Stability in Gas Tungsten Arc Welds of Ti-added Reduced Activation Ferritic/Martensitic Steel
- Yoon-Hwan Jo, Tae-Hun Kim, Chiwon Kim, Joonoh Moon, Chang-Hoon Lee, Seung-Jin Jung, Hyun-Uk Hong
- J Weld Join. 2022;40(4):295-304.
-
Research Papers
Study on Laser Welding of Dissimilar Materials between Aluminum and Copper (Ⅰ) - Research Trend in Laser Welding Technology and Materials Testing Methods -
- Yong Kim, Su Jin Jeong, Seong Min Yun, Je In Lee
- J Weld Join. 2022;40(5):416-437.
-
Review Paper
An Overview of Resistance Element Welding with Focus on Mechanical and Microstructure Joint and Optimization in Automotive Metal Joints
- Ji Yeon Shim, Min Woo Park, Ill Soo Kim
- J Weld Join. 2023;41(1):37-48.
-
Research Papers
Strategy of Suppressing the Solidification Cracking Susceptibility of 247LC Superalloy Weld Metals using Commercial Ni-Based Fillers
- Eun-Joon Chun
- J Weld Join. 2023;41(1):64-72.
-
Research Papers
Effects of Mo and Nb on Microstructure and Charpy Impact Properties of CGHAZ in HSLA Steels
- Min Gu Kim, Sung Kyu Cho, Sang Yong Shin
- J Weld Join. 2022;40(1):22-32.
-
Research Papers
Intermetallic Compound Growth Induced by Electromigration in Sn-2.5Ag Solder Joints with ENEPIG Surface Finish
- Jieun Yu, Sujong Kim, Won Sik Hong, Namhyun Kang
- J Weld Join. 2022;40(3):225-232.
-
Research Papers
Effect of Process Parameters and Nugget Growth Rate on Liquid Metal Embrittlement (LME) Cracking in the Resistance Spot Welding of Zinc-Coated Steels
- WooSung Jin, Arun Lalachan, Siva Prasad Murugan, Changwook Ji, Yeong-do Park
- J Weld Join. 2022;40(6):464-477.
-
Research Papers
Recent Research Trend of Arc Welding Quality Monitoring Technology in Korea
- Young-Min Kim, Jason Cheon
- J Weld Join. 2023;41(2):81-89.
-
Research Papers
Recent Research Trend of Resistance Spot Welding Quality Monitoring Technology in Korea
- Young-Min Kim, Insung Hwang, Jason Cheon
- J Weld Join. 2023;41(2):90-99.
-
Research Papers
A Review on Effects of Weld Porosity in Laser-Arc Hybrid Welding for Aluminum Alloys
- Seong hyun Kim, Jae-Deuk Kim, Hyun-Uk Jun, Joo Yong Cheon, Seungjong Yun, Yangdo Kim, Changwook Ji
- J Weld Join. 2023;41(5):358-366.
-
Research Papers
Thermal Deformation Analysis Methodology Development for Inconel Overlaying
- S. R. Rajesh, JinSun Yoo, JungGoo Park, DooJin Choi
- J Weld Join. 2022;40(2):107-117.
-
Review Papers
Recent Trends to Improve Laser Weldability of Al-Si coated Hot-stamped Boron Steel
- Hyunuk Jun, Changwook Ji
- J Weld Join. 2022;40(2):175-186.
-
Research Papers
A Study on Mechanical Properties of Austenitic Stainless Steel Welds Using ArcTig Welding
- Sung-Hyun Jeon, Tae-Wan Kim, Woo-Hyeon Ju, Yu-Chan Kim
- J Weld Join. 2022;40(4):343-351.
-
Research Papers
Vaporization Modeling and Experimental Verification During Laser Beam Welding for 24Mn Steel
- Myeonghwan Choi, Daewon Cho, Namhyun Kang
- J Weld Join. 2022;40(6):457-463.
-
Research Papers
Effect of Top Sheet Materials on Joint Performance of Self-Piercing Riveting
- Md Abdul Karim, Siva Prasad Murugan, KiMan Bae, Jongjin Baek, Changwook Ji, Wooram Noh, Han-Ju Lee, Will Jang, Duck Bong Kim, Yeong-Do Park
- J Weld Join. 2022;40(6):512-524.
-
Research Papers
Prediction of Weld Tensile-Shear Strength using ANN Based on the Weld Shape in Aluminum Alloy GMAW
- Dong-Yoon Kim, June Hyung Hwang, Gwang-Gook Kim, Young-Min Kim, Jiyoung Yu, Junhong Park
- J Weld Join. 2023;41(1):17-27.
-
Research Papers
Solder Joint Degradation and Electrochemical Metallic Ion Migration Property of Solder Joints with Surface Finish
- Hye Min Lee, Mi-Song Kim, Won Sik Hong
- J Weld Join. 2023;41(4):265-274.
-
Research Papers
Bonding Property of Middle Temperature Sn-Ag-Cu Solder Ball Joint of Ball Grid Array Package
- Joo Young Bae, Mi-Song Kim, Hye Min Lee, Seul Gi Lee, Young-Woo Lee, Jeong Tak Moon, Won Sik Hong
- J Weld Join. 2023;41(5):379-386.
-
Research Papers
Effect of Carburization on the Microstructure and Laser Weldability of 316L Stainless Steel
- Gitae Park, Mokyoung Lee, Chan Kyu Kim, Sangwoo Song, Sung Chul Cha, Heon Joon Park, Jun-Ho Kim, Boyoung Jeong
- J Weld Join. 2023;41(6):475-485.
-
Research Papers
Effect of Additive Machines and Powders on Mechanical Properties of Stainless Steel 316L Manufactured by L-PBF
- Dongjin Oh, Youngjun Kang, Kidong Kim
- J Weld Join. 2022;40(4):322-328.
-
Research Papers
Fatigue Crack Growth Evaluation of IMO Type B Spherical LNG Cargo Tank Considering the Effect of Stress Ratio and Load History
- Myung-Sup Lee, Myung-Hyun Kim
- J Weld Join. 2022;40(1):40-47.
-
Research Papers
Evaluation of Welding Residual Stress Characteristics of High-Strength Steel for Offshore Structures Based on Constraint Effect
- Daehee Seong, Gyubaek An, Jong-ung Park
- J Weld Join. 2022;40(1):16-21.
-
Review Papers
A Review of the Brazeability of Low-Temperature and Nano-Reinforced Al-Based Brazing Filler Metals
- Furkan, Hye-Jeong Kim, Gun-hwan Lee, Jae Pil Jung
- J Weld Join. 2022;40(3):216-224.
-
Research Papers
Effects of Solder Powder Particle Size and Substrate Surface Finish on Degradation Properties of Solder Joints
- Mi-Song Kim, Won Sik Hong, Hye-Min Lee, Myeongin Kim
- J Weld Join. 2022;40(3):207-214.
-
Research Papers
Effect of Line-Heating on the Microstructural and Mechanical Characteristics of 320-MPa-Grade High-Strength Hull Plates
- Seonghoon Jeong, Seunglae Hong, JunSeok Seo, Woohyuk Choi
- J Weld Join. 2022;40(4):352-357.
-
Research Papers
A Study on the Microstructure and Mechanical Properties of the Coarse Grain Heat Affected Zone in EH40 Grade High Strength Structural Steels
- Seonghoon Jeong, Seunglae Hong, JunSeok Seo, Ji-Hee Son, Hyung Goun Joo
- J Weld Join. 2022;40(5):410-415.
-
Research Papers
Aluminum Arc Welding Technology to Improve Quality and Productivity of Electric Vehicles
- Woohyeon Ju, Taewan Kim, Yoochan Kim
- J Weld Join. 2022;40(5):438-447.
-
Research Papers
Secondary Thermal Deformation Characteristics of Stiffened Plate Exposed to Fire
- Jeong-Hwan Kim, Seung-Su Yu, Myung-Su Yi, Jung-Kwan Seo
- J Weld Join. 2022;40(5):385-392.
-
Research Papers
Characteristics of Cold Cracking in the Heat-Affected Zone of Carbon Steel
- Yongjoon Kang, Jungmin Kim, Gidong Kim, Namkyu Kim, Sangwoo Song
- J Weld Join. 2022;40(6):478-484.
-
Research Papers
T-joint Fillet Laser Welding of High-Strength Stainless Steel for Curtain Wall Frames
- Gitae Park, Seunggab Hong, Kyongyun Yeau, Boyoung Jeong
- J Weld Join. 2022;40(6):485-495.
-
Review Paper
Effects of Shielding Gases on the Weldability of Laser Welded Austenitic Stainless Steel
- Yeonho Kwak, Seung Hwan Lee, Minjung Kang
- J Weld Join. 2022;40(6):525-532.
-
Research Papers
Statistical Analysis of Korean Welding Industry (V)
- Minjung Kang, Won-Ho Choi, Cheolhee Kim
- J Weld Join. 2023;41(2):107-111.
-
Research Papers
A Study on the Development of Deep Learning Algorithm for Determining External Quality of Welded Parts Using Transfer Learning
- Bo Wook Seo, Sung Bin Han, Jun Young Heo, Seok Kim, Young Tae Cho
- J Weld Join. 2023;41(2):132-139.
-
Research Papers
Investigation of Joint Quality 980 MPa Grade GA Steel Sheet and 5052 Aluminum Alloy by Electromagnetic Self-Piercing Riveting
- Min-Seok Kim, Sung-Jin Park, Ji-Yeon Shim
- J Weld Join. 2023;41(3):161-168.
-
Research Papers
Global Market Analysis for Welding Consumables and Welding Robot (Ⅱ)
- Byeong-jin Kim, Minjung Kang, Jason Cheon
- J Weld Join. 2023;41(3):181-184.
-
Research Papers
A Study on Changes of Bead Shape and Metal Transfer Mode Affected by Molten Pool Behavior for Welding Position in GMAW Process
- Sang-Hyun Ahn, Jun Sun Bae, Dae-Won Cho, Dae-Hwan Kim, Seung-Hoon Bae, Seonmin Kim, Jinhoon Kang, Tae-Kook Park, Chang Woo Park, Jung Goo Park, Doo Jin Choi
- J Weld Join. 2023;41(4):244-253.
-
Research Papers
Solidification Crack Free Welding Strategy via Ultra High Precision Laser Scanning at a Single Grain of Directionally Solidified and Single Crystal Superalloys
- Seong-Jin Lee, Kyeong-Min Kim, Heeshin Kang, Seong-Moon Seo, Wonah Park, Eun-Joon Chun
- J Weld Join. 2023;41(4):254-264.
-
Research Papers
Hot Cracking Characteristics During Single-Mode Fiber and Green Laser Welding Processes in Lithium-Ion Battery Pack Manufacturing
- Jae-Hyeon Park, Myung-Jin Kim, Heeshin Kang, Wonah Park, Eun-Joon Chun
- J Weld Join. 2023;41(5):367-378.
-
Research Papers
Bonding Property of Flip-Chip Chip-Scale Package with Vacuum Reflow and Thermal Compression Bonding Processes
- So-Hee Hyun, Hye Min Lee, Mi-Song Kim, Won Sik Hong
- J Weld Join. 2023;41(5):387-395.
-
Research Papers
A Study on Deformation According to Steel Constraints During Thick-Plate Fillet Welding and Line Heating
- Dong-Hee Park, Jung-Goo Park, Chang-Woo Park, Jin-Hyuk Yang, Jun-Seok Park, Ji-Sun Roh, Myung-Su Yi, Do-Kyun Kim, Jae-Myung Lee
- J Weld Join. 2023;41(6):508-518.
-
Research Papers
Microstructure and Wear Characteristics of Multilayer Laser-Cladded Hypereutectic Al-Si Alloys
- Hyoung-Keun Lee
- J Weld Join. 2022;40(1):48-53.
-
Research Papers
Study of the Change in Surface Wettability for Zircaloy-4 Utilizing Spatially Homogenized Nanosecond Laser Beam
- Daewong Park, Sungyoon Lee, Seungjin Hwang, Geonhui Lee, Hanjin Jo, Sanghyun Park, Seryeyohan Cho, Tae Jun Yu
- J Weld Join. 2022;40(2):156-164.
-
Review Papers
Trend of Resistance Spot Welding Technology of Al-Si Coated Hot-Stamped Boron Steel for Automobile Body
- Wonho Kim, Changwook Ji
- J Weld Join. 2022;40(2):187-197.
-
Research Papers
Effects of Welded Pipe-cutting on the Residual Stress Re-Distribution and Engineering Critical Assessment
- Ji-Sun Roh, Myung-Su Yi, Myung-Hyun Kim
- J Weld Join. 2022;40(2):99-106.
-
Review Papers
Recent Studies of Transient Liquid Phase Bonding Technology for Electric Vehicles
- Dong-Hwan Lee, Min-Haeng Heo, Jeong-Won Yoon
- J Weld Join. 2022;40(3):233-241.
-
Research Papers
FEA Simulation Based Power Adaption for Laser Welding of Radii
- Johannes Gaigl
- J Weld Join. 2022;40(3):265-270.
-
Research Papers
Conduction Path Formation Characteristics of Solderable Polymer Composite Filled with Low-Melting-Point and High-Melting-Point Alloy Fillers
- Min Jeong Ha, Ji-Ho Kim, Jae-Goo Han, Jin-Seok Yang, Jong-Min Kim, Byung-Seung Yim
- J Weld Join. 2022;40(3):242-247.
-
Research Papers
Laser Soldering Process Optimization of MEMS Probe of Probe Card for Semiconductor Wafer Test
- Myeongin Kim, Won Sik Hong, Mi-Song Kim
- J Weld Join. 2022;40(3):271-277.
-
Research Papers
Effect of Heat Treatment Conditions on Resistance Spot Weldability of 1.8 GPa-grade Al-Si Coated Hot Stamping Boron Steel
- Jaehun Kim, Hyunuk Jun, Wonho Kim, Jooyong Cheon, Jaedeuk Kim, Ilguk Jo, Changwook Ji
- J Weld Join. 2022;40(4):311-321.
-
Research Papers
Energy-based Beta Peak Extraction from Dynamic Resistance Curves
- JaHun Ku, Youngdo Park, Namkug Ku
- J Weld Join. 2022;40(5):401-409.
-
Research Papers
Welding Deformation Characteristics and Mitigation Method of Hub Flange
- Ji-Sun Roh, Chang-Woo Park, Jung-Goo Park
- J Weld Join. 2022;40(5):393-400.
-
Research Papers
Optimization of Welding Process Parameter for Gap Response in Aluminum GMAW Using Taguchi Method
- Hyojun Choi, Taehoon Kang, Jiyoung Yu, Young-Min Kim, Seung Hwan Lee, Dong-Yoon Kim
- J Weld Join. 2023;41(1):28-36.
-
Research Papers
A Weldment Characteristics on Laser Welding of 2XXX Aluminum Alloys
- Sang-Gu Lee
- J Weld Join. 2023;41(1):49-55.
-
Research Papers
Optimization of the Additive Manufacturing of Co-Cr Alloy by using DED Process
- Yongjae Kwon, SeongSeon Shin, SangEun Joo, JongHoon Lee, JunHo Hwang, HyunDeok Kim
- J Weld Join. 2023;41(1):56-63.
-
Research Papers
Fabricated of the SCC Reference Specimen for Increasing of In-Service Inspection Accuracy in Nuclear Power Plant
- Jaesung Kim
- J Weld Join. 2023;41(2):100-106.
-
Research Papers
A Study on the Optimization of 3D Printing Additive Manufacturing by Direct Energy Deposition Method Using High Speed Steel Material
- Yongjae Kwon, SeongSeon Shin, SangEun Joo, JongHoon Lee, JunHo Hwang, HyunDeok Kim
- J Weld Join. 2023;41(3):149-155.
-
Research Papers
Wear Properties of High-Hardness Tool Steel by Directed Energy Deposition Based Additive Manufacturing
- Sungwook Kim, Chang-Keun Chun
- J Weld Join. 2023;41(3):169-174.
-
Research Papers
Effect of Post-Weld Heat Treatment Temperature on the Mechanical Properties and Microstructure of Weld Heat-Affected Zone of 2.25Cr-1Mo Steel
- Yongjoon Kang, Kangmyung Seo, Jun-Ho Lee, Chang-Young Oh, Seung-Gun Lee
- J Weld Join. 2023;41(3):175-180.
-
Research Papers
Improved Accuracy of Prediction of Thermal Deformation of the Stern Shaft Block Considering the Erection Process
- Jun-Seok Park, Hyun-Ho Lee, Jung-Kwan Seo
- J Weld Join. 2023;41(3):195-201.
-
Research Papers
A Study on the Change of Wire Feeding Speed in GTA Welding (Ⅰ) - Changes in the Modes of Metal Transfer -
- Daekyu Park, Jehyoung Cho, Youngwhan Park
- J Weld Join. 2023;41(3):202-206.
-
Research Papers
Numerical Investigation on Reduction Characteristics of Welding Deformation According to Standoff Distance in Heat Sink Welding Process
- Ji-Hyun Yi, Bum-Su Go, Yong-Hyuk Kwon, Hee-Seon Bang
- J Weld Join. 2023;41(3):213-220.
-
Research Papers
Interfacial Properties of Sn-Cu-xCr Alloy using Laser-Assisted Bonding
- Shin-Il Kim, Dong-Yurl Yu, Yun-Chan Kim, Junhyuk Son, Dongjin Byun, Junghwan Bang
- J Weld Join. 2023;41(4):291-298.
-
Research Papers
Development of an Arc Image Classification Algorithm in Tip-Rotating Arc Welding using Camera Image Monitoring and Deep Learning
- Sol Mi Lee, Young Whan Park
- J Weld Join. 2023;41(4):299-307.
-
Research Papers
Effects of Welding Parameters on Droplet Transfer and Bead Geometry in Laser Welding with Aluminum and Stainless Steel Filler Wires
- Joonghyeon Shin, Seung Hwan Lee, Minjung Kang
- J Weld Join. 2023;41(5):342-348.
-
Research Papers
A Study on the Characteristics about Shaft Deflection According to the Change in Manufacturing Sequences
- Jun-Seok Park, Joo-Shin Park, Jung-Kwan Seo
- J Weld Join. 2023;41(5):396-402.
-
Research Papers
A Study on the Microstructure and Mechanical Properties of SA508 Gr.3 Cl.1 Steel Cladded by a Laser Beam using Alloy 82 and 308L Powders for Small Modular Reactor
- In-Chul Jung, Insung Choi, Kwang-Hyun Lee, Jeong Suh, Seong-Woo Jo, Shi-Hong Kim, Hyun-Uk Hong
- J Weld Join. 2023;41(6):429-439.
-
Research Papers
Market and Development Trends in Thermal Cutting Technology for Nuclear Power Plant Decommissioning
- Sujin Lee, Jongdo Kim, Jeong Suh, Dongsig Shin, Induck Park
- J Weld Join. 2023;41(6):440-453.
-
Research Papers
Review on Ultrasonic and Laser Welding Technologies of Multi-Layer Thin Foils for the Lithium-Ion Pouch Cell Manufacturing
- Musung Kim, Heeseon Bang, Soongkeun Hyun, Sung Yi, Cheolhee Kim
- J Weld Join. 2023;41(6):462-474.
-
Research Papers
A Study on Bead on Plate (BOP) Test for Laser Welding Application of Stainless Steel to Liquified Hydrogen Tank (PART I: STS 304)
- Eul-Yong Ha, Chang-Min Pyo, Young-Hyun Kim, Jin-Seok Woo, Sun-Pil Kim, Myung-Su Yi, Sung-Wook Kang, Chang-Wook Ji, Jae-Woong Kim
- J Weld Join. 2023;41(6):500-507.
-
Research Papers
Bonding Characteristics of Solder and Sinter Joints on Active-Metal-Brazing Substrates with Nano Sputtered Ag-Cu-Ti Brazing Filler Metal
- Mi-Song Kim, Won Sik Hong, Yong-Mo Kim
- J Weld Join. 2023;41(6):558-565.
-
Research Papers
A Study on the Residual Stress of Seam Pipe Cutting and Girth Welding
- Ji-Sun Roh, Myung-Su Yi, Jung-Goo Park, Myung-Hyun Kim
- J Weld Join. 2024;42(1):27-40.
-
Research Papers
Research Trends in the Directed Energy Deposition Method of Heterogeneous Materials
- Raj Narayan Hajra, Jeoung Han Kim
- J Weld Join. 2024;42(1):88-98.
-
Research Papers
Development of Creep and Mechanical Properties for SMAW Cr-Mo-X Steel Welds
- Sanghyun Bae, Yongchul Kim, Stephen Liu
- J Weld Join. 2024;42(1):117-124.
-
Research Papers
A Study on the Applicability of A-TIG Welding of Semi-Automatic Cold Wire Feeding Process for Cryogenic Stainless Steel Pipes
- Hee-Keun Lee, Kwang-Hee Yun
- J Weld Join. 2024;42(3):231-238.
-
Research Papers
Influence of Oxide Inclusions on the Creep Properties of Electron Beam Welds in Ti-added Reduced Activation Ferritic/Martensitic Steel
- Jae-Yeon Han, Yoon-Hwan Jo, Chiwon Kim, Chang-Hoon Lee, Joonoh Moon, Hyun-Uk Hong
- J Weld Join. 2024;42(3):282-291.