Design of self-piercing rivet to joint in advanced high strength steel and aluminium alloy sheets |
Dongbum Kim**, Yuangen Qiu**, Hae-Yong Cho* |
*Dept. of Mechanical Engineering, Chungbuk National University, Cheongju 362-763, Korea **Graduate School of Precision Mechanical Engineering, Chungbuk National University, Cheongju 362-763, Korea |
Correspondence:
Hae-Yong Cho Email: hycho@chungbuk.ac.kr Published online June 30, 2015
|
|
|
Self-piercing riveting is an joining method of advanced high strength steels (AHSS) and other dissimilar materials. It has attracted considerable interest from the automotive industry. The SPR has become an interesting alternative joining technique for difficult to weld materials such as steels and aluminium alloys. In this paper, self-piercing rivet and anvil for SPR were designed for the joining conditions with AHSS and aluminium alloy. Various conditions of SPR were simulated for the design of rivets and anvils. The simulated results were in good agreement with experimental ones. As a result, over HV500 rivet is desirable to joint SPFC780 AHSS and aluminum alloy. |
Keywords:
Self-piercing rivet(SPR) | Advanced high strength steels(AHSS) | SILAFONT | Dissimilar sheet metals | Finite element method(FEM)
|
|
|
|
|
 |
|
|
 |
 |
Register for e-submission |
Register here to access the e-submission system of Journal of Welding and Joining for authors and reviewers.
|
Manuscript Submission |
To submit a manuscript, please visit the Journal of Welding and Joining e-submission management system at https://submit.e-jwj.org, read the Instructions for Authors, and log into the Journal of Welding and Joining e-submission system. For assistance with manuscript submission, please contact: koweld@kwjs.or.kr.
|
Free archive |
Anyone may access any past or current articles without logging in.
|
|
|