Previous issues
Volume 28 Issue 4
-
Prediction of Heating Line for Plate Forming in Induction Heating Process Using Artificial Neural Network
- Young-Soo Yang, Truong-Thinh Nguyen, Kang-Yul Bae
- Journal of KWJS. 2010;28(4):1-4.
-
Trend of Nondestructive Testing in Shipbuilding Industry
- Sangbok Lee
- Journal of KWJS. 2010;28(4):5-8.
-
The Study on Radiation Source Optimization for Boiler Tube Weldments
- Sang-Ki Park, Yean-Shic Ahn, Doo-Song Gil
- Journal of KWJS. 2010;28(4):9-13.
-
Development of On-line Welding Management System for Quality Improvement of Power Plant Construction
- Sang-Ki Park, Yean-Shic Ahn, Doo-Song Gil
- Journal of KWJS. 2010;28(4):14-17.
-
Effect of Welding Thermal Cycle on Microstructure and Pitting Corrosion Property of Multi-pass Weldment of Super-duplex Stainless Steel
- Seong-Kil Nam, Se-Jin Park, Hye-Sung Na, Chung-Yun Kang
- Journal of KWJS. 2010;28(4):18-25.
-
A Study on the Evaluation of Transverse Residual Stress at the Multi-pass FCA Butt Weldment using FEA
- Sang-Beom Shin, Dong-Ju Lee, Dong-Hwan Park
- Journal of KWJS. 2010;28(4):26-32.
-
A Study on the Predicting Transverse Residual Stress at the Ultra Thick FCA Butt Weldment of Hatch Coaming in a Large Container Vessel
- Sang-Beom Shin, Dong-Ju Lee, Joo-Sung Lee
- Journal of KWJS. 2010;28(4):33-40.
-
Behavior of Global Bending Distortion of Hatch-cover in Container Carrier during Fabrication Process
- Dong-Ju Lee, Gyung-Gyu Kim, Sang-Beom Shin
- Journal of KWJS. 2010;28(4):41-48.
-
A Study on GMA Welding Automation of STS301L Joint using Design of Experiment
- SeungYeb Baek, IlSeon Sohn
- Journal of KWJS. 2010;28(4):49-54.
-
A Study on the Welding Current in Butt Joint P-GMA Welding with Acute Groove Angles
- Ryoon-Han Kim, Suck-Joo Na, Cheol-Hee Kim
- Journal of KWJS. 2010;28(4):55-60.
-
A Study on Laser Assisted Machining for Silicon Nitride Ceramics (Ⅰ) - Preheating Characteristics and Oxidation Behaviors of Silicon Nitride Ceramics with Machining Parameters
- Jong-Do Kim, Su-Jin Lee, Jeong Suh, Jae-Hoon Lee
- Journal of KWJS. 2010;28(4):61-66.
-
A Study on the Arc Characteristics and Weld Pool Analysis of GHTAW under the Space Environment
- Sang-Hoon Lee, Suck-Joo Na
- Journal of KWJS. 2010;28(4):67-72.
-
The Effect of Process Variables on Mechanical Properties and Formability in GTA Welds of Commercial Pure Titanium Sheet
- Jee-hoon Kim, Jae-keun Hong, Jong-taek Yeom, Nho-kwang Park, Chung-yun Kang
- Journal of KWJS. 2010;28(4):73-80.
-
Development of Intelligent Monitoring System for Welding Process Faults Detection in Auto Body Assembly
- TaeHyung Kim, Jiyoung Yu, Sehun Rhee, YoungWhan Park
- Journal of KWJS. 2010;28(4):81-86.
-
IIW Report
- 편집부
- Journal of KWJS. 2010;28(4):87-127.
-
News of the Korean Welding and Joining Society
- 편집부
- Journal of KWJS. 2010;28(4):128-131.
-
News of the Members
- 편집부
- Journal of KWJS. 2010;28(4):134-138.