Previous issues
Volume 30 Issue 6
-
Technical review
Joint Reliability of Sn3.5Ag, Sn0.7Cu and Sn5.0Sb Pb-free Solder and Hybrids Joining Process for Application of Automobile Electric Module
- Myong-Suk Kang, Jung-Hwan Bang, Chang-Woo Lee
- Journal of KWJS. 2012;30(6):1-5.
-
Technical reports
Evaluation HIC Crack Resistance for Plastic Deformation of API-X65 Plate
- Hoi-Soo Ryoo, Jun Seok Seo, Hee-jin Kim, Dong-Eon Lee
- Journal of KWJS. 2012;30(6):6-9.
-
Technical reports
A Welding Characteristics of Large Caliber-Thick Plate Pressure Vessel Low Alloy Steel (Mn-Mo)
- Jong-Seok Ahn, Jin-Keun Park, Jae-Yeon Yoon
- Journal of KWJS. 2012;30(6):10-14.
-
Special Issues
Brazing Filler Metal and Process for Stainless Steel
- Sung Chul Hong, Sang Yoon Park, Do Hyun Jung, Joo Hee Oh, Jae Hoon Lee, Wonjoong Kim, Jae Pil Jung
- Journal of KWJS. 2012;30(6):15-20.
-
Special Issues
Trend on Research TLP Bonding of Ni and Ni Base Superalloy for High Temperature Heat Exchanger
- Chung-Yun Kang
- Journal of KWJS. 2012;30(6):21-26.
-
Special Issues
Recent Study of TiAl Brazing
- Ho-Cheon Yoo
- Journal of KWJS. 2012;30(6):27-35.
-
Research Papers
A Technique for Defect Detection of Condenser Tube in Support Plate Region using Guided Wave
- Yong-Kwon Kim, Ik-Keun Park, Sae-Jun Park, Yeon-Shik Ahn, Doo-Song Gil
- Journal of KWJS. 2012;30(6):36-41.
-
Research Papers
A Experiment Study on Selection the Optimal Condition for GMA Root-pass Welding in Overhead and Vertical Position
- Ji-Sun Kim, In-Ju Kim, Ill-Soo Kim
- Journal of KWJS. 2012;30(6):42-48.
-
Research Papers
A Experiment Study of Torch Distance on Automated Tandem GMA Welding System
- Ji-Hye Lee, Ill-Soo Kim, Seong-Myeong Jung, Jong-Pyo Lee, Young-Su Kim, Min-Ho Park
- Journal of KWJS. 2012;30(6):49-55.
-
Research Papers
A Study on the Weldability of Magnesium Alloy by Laser Heat Source (Ⅱ)
- Mechanical Properties of laser-welded AZ31B-H24 and AZ31B-O -
- Jung-Han Lee, Jong-Do Kim, Mun-Yong Lee
- Journal of KWJS. 2012;30(6):56-61.
-
Research Papers
Experimental Study on Evaluation of Bonding Strength of Adhesively Bonded Joints by Adhesive
- Ki-Yeob Kang, Jae-Myung Lee
- Journal of KWJS. 2012;30(6):62-67.
-
Research Papers
Residual Stress Prediction in Multi-layer Butt Weld Using Crack Compliance Method
- Yooil Kim, Jang Hyun Lee
- Journal of KWJS. 2012;30(6):74-79.
-
Research Papers
A Study on the Measurement of Stress Intensity Factors for the Fatigue Crack Propagation
- Dong-Jin Oh, Myung-Hyun Kim
- Journal of KWJS. 2012;30(6):80-85.
-
Research Papers
Fatigue Assessment of Load-carrying Asymmetric Double Bevel Cruciform Welded Joints using Structural Stress Approach
- Seong-Min Kim, Young-Nam Kim, Seung-Hyun Lee, Myung-Hyun Kim
- Journal of KWJS. 2012;30(6):86-91.
-
Research Papers
Mechanical Properties and Fabrication of WC-Co Hard Materials by Rapid Sintering Method for Friction Stir Welding Tool Application
- Hyun-Kuk Park, Hee-Jun Youn, Jung-Han Ryu, Jun-Ho Jang, In-Jin Shon, Ik-Hyun Oh
- Journal of KWJS. 2012;30(6):92-97.
-
Research Papers
Effect of Welding Condition on Tensile Properties of Friction Stir Lap Joint of Dissimilar Al Alloy, KS5J32/AA6K31
- Sang-Ju Kim, Tae-Jin Yoon, Sang-Woo Song, Chung-Yun Kang
- Journal of KWJS. 2012;30(6):98-105.
-
Research Papers
Effect of Brazing Condition on Tensile Properties in Brazing Joints of Inconel-625/Ni-201 Using MBF-30
- Jeong-Woo Yu, Sang-Hyun Park, Chang-Su Kim, Chung-Yun Kang
- Journal of KWJS. 2012;30(6):106-112.
-
Research Papers
Design by Topology Optimization and Performance Test of Ultrasonic Bonding Module
for Flip-Chip Packaging
- Ji Soo Kim, Jong Min Kim, Soo Il Lee
- Journal of KWJS. 2012;30(6):113-119.
-
Research Papers
A Study on the Thermal Distortion Analysis of Welded Structures having K/X Groove using shell elements
- Yunsok Ha, Jiwon Choi
- Journal of KWJS. 2012;30(6):120-125.
-
Research Papers
A Study on Bead Geometry Prediction the GMA Fillet Welding using Genetic Algorithm
- Young-Su Kim, Ill-Soo Kim, Ji-Hye Lee, Sung-Myoung Jung, Jong-Pyo Lee, Min-Ho Park, Reenal Ritesh Chand
- Journal of KWJS. 2012;30(6):126-132.
-
Research Papers
Lobe Curve Characteristic Analysis of Resistance Spot Welding for Sheet Combination of 780MPa Steel Sheet Using Simulation
- Journal of KWJS. 2012;30(6):554-559.